Centos7 / 8使用ansible批量部署zabbix监控扩展

发表评论
156 views

A+

所属分类：VPS教程

Ansible是一个开源的基于OpenSSH的自动化配置管理工具。可以用它来配置系统，部署软件和编排更高级的IT任务，可以持续部署或零装载更新。Ansible的主要目标是简单和易用，并且它还高度关注安全性和可靠性。基于这样的目标，Ansible适用于开发人员，系统管理员，发布工程师，IT经理，以及介于两者之间的所有人。Ansible适合管理几乎所有的环境，从拥有少数实例的小型环境到有数个实例的企业环境。
使用Ansible无须在被管理的机器上安装代理，所以不存在如何升级远程守护进程的问题，也不存在因卸载了守护进程而无法管理系统的问题。

1，部署密钥认证

2，安装依赖epel源和ansible软件


[root@zabbix-server ~]# yum install epel-release 
[root@zabbix-server ~]# yum install ansible -y

3，解除ssh远程连接交互模式


[root@zabbix-server ~]#  mkdir /root/.ssh/
[root@zabbix-server ~]#  echo "StrictHostKeyChecking no" > /root/.ssh/config

4，把服务器组规划为[zc7]和[zc8]：
`[注意：私钥必须是/root/.ssh/id_rsa 并且权限设置成600 chmod 600 /root/.ssh/id_rsa]`


[root@zabbix-server ~]#  vi /etc/ansible/hosts
#[zc7]和[zc8]为分组标签(标签是自定义) [zc7]为centos7系统 [zc8]为centos8系统  IP  用户  端口   
[zc7]
80.78.x.x	ansible_ssh_user=root	ansible_ssh_port=22
168.138.x.x	ansible_ssh_user=root	ansible_ssh_port=22
140.238.x.x	ansible_ssh_user=root	ansible_ssh_port=22
140.238.x.x	ansible_ssh_user=root	ansible_ssh_port=22
129.146.x.x	ansible_ssh_user=root	ansible_ssh_port=22
158.101.x.x	ansible_ssh_user=root	ansible_ssh_port=22
185.45.x.x	ansible_ssh_user=root	ansible_ssh_port=22
129.226.x.x	ansible_ssh_user=root	ansible_ssh_port=22
150.109.x.x	ansible_ssh_user=root	ansible_ssh_port=22

[zc8]
173.82.x.x  ansible_ssh_user=root   ansible_ssh_port=22
91.199.x.x  ansible_ssh_user=root   ansible_ssh_port=22
204.13.x.x  ansible_ssh_user=root   ansible_ssh_port=22

5，[zc7]和[zc8]分组完成以后，进行ping测试


[root@zabbix-server ~]#  ansible zc7 -m ping
129.146.x.x | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    },
    "changed": false,
    "ping": "pong"
}
158.101.x.x | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    },
    "changed": false,
    "ping": "pong"
}
.....

6，开始在`[zc7] 和 [zc8]`服务器组的每一台部署zabbix-agent


### 开启[zc7] 和 [zc8] 组每台的10050端口
[root@zabbix-server ~]#  ansible zc7 -m shell -a "firewall-cmd --zone=public --add-port=10050/tcp --permanent"
[root@zabbix-server ~]#  ansible zc7 -m shell -a "firewall-cmd --reload"

### 删除原有的zabbix-agent 【zc7】 是在 /etc/ansible/hosts 自定义的分组名称
[root@zabbix-server ~]#  ansible zc7 -m shell -a "yum remove zabbix-agent -y"

### 查看系统版本是否一致，大版本一致即可，比如用centos7都用centos7版本
[root@zabbix-server ~]#  ansible zc7 -m shell -a "cat /etc/redhat-release"

### [c7] 此组为centos7系统安装zabbix源
[root@zabbix-server ~]#  ansible zc7 -m shell -a "rpm -Uvh https://repo.zabbix.com/zabbix/5.0/rhel/7/x86_64/zabbix-release-5.0-1.el7.noarch.rpm"

### [zc8] 此组为 centos8 系统安装zabbix源
[root@zabbix-server ~]#  ansible zc8 -m shell -a "rpm -Uvh https://repo.zabbix.com/zabbix/5.0/rhel/8/x86_64/zabbix-release-5.0-1.el8.noarch.rpm"

### 在【zc7】安装zabbix-agent
[root@zabbix-server ~]#  ansible zc7 -m shell -a "yum install zabbix-agent -y"

### 查看是否安装成功
[root@zabbix-server ~]#  ansible zc7 -m shell -a "rpm -qa zabbix-agent"

### 创建/zabbix_agentd.conf模板，并拷贝到zabbix服务器组 （篇尾附带）
[root@zabbix-server ~]#  ansible zc7 -m copy -a "src=/root/zabbix_agentd.conf dest=/etc/zabbix/"

### 创建并查看zabbix-agent使用的psk密钥文件
[root@zabbix-server ~]#  ansible zc7 -m shell -a "openssl rand -hex 32 |tee /etc/zabbix/zabbix.psk"
[root@zabbix-server ~]#  ansible zc7 -m shell -a "ls -al /etc/zabbix/zabbix.psk"

7，创建脚本，批量修改[zc7]和[zc8]服务器组中每一台的`zabbix_agentd.conf`文件



### 把[zabbix]服务器组复制到临时文件中
[root@zabbix-server ~]#  cat zhost.txt 
80.78.x.x	ansible_ssh_user=root	ansible_ssh_port=22
168.138.x.x	ansible_ssh_user=root	ansible_ssh_port=22
140.238.x.x	ansible_ssh_user=root	ansible_ssh_port=22
140.238.x.x	ansible_ssh_user=root	ansible_ssh_port=22
129.146.x.x	ansible_ssh_user=root	ansible_ssh_port=22
158.101.x.x	ansible_ssh_user=root	ansible_ssh_port=22
185.45.x.x	ansible_ssh_user=root	ansible_ssh_port=22
129.226.x.x	ansible_ssh_user=root	ansible_ssh_port=22
150.109.x.x	ansible_ssh_user=root	ansible_ssh_port=22

[root@zabbix-server ~]#  cat zabbix-agent.sh
#!/bin/bash

for i in $(cat zhost.txt |awk '{print $1}');

do

### 生成psk密钥
###tmp=$(openssl rand -hex 32)

### 把生成的密钥重定向到 [zc7] 和 [zc8] 的每台主机的/etc/zabbix/zabbix.psk文件
###ansible $i -m shell -a "echo $tmp >/etc/zabbix/zabbix.psk"

### 把生成的密钥重定向到 [zc7] 和 [zc8] 的每台主机的/etc/zabbix/zabbix.psk文件，并查看psk密钥
ansible $i -m shell -a "openssl rand -hex 32 |tee /etc/zabbix/zabbix.psk"
ansible $i -m shell -a "cat /etc/zabbix/zabbix.psk"

### 修改 [zc7] 和 [zc8] 服务器组的PSK密钥名称，不能使用统一名称把 PSK-milcdn1 修改为PSK-ip 对应篇尾的zabbix_agentd.conf的psk文件
ansible $i -m shell -a "sed -i s/PSK-milcdn1/PSK-$i/g /etc/zabbix/zabbix_agentd.conf"

### 把 [zc7] 和 [zc8] 服务器组的IP和psk密钥 保存到psk文件方便在zabbix server web页面添加。
echo "$i  --  $tmp" >> psk.txt

### 设置zabbix-agent开始自启动，并启动和查看zabbix-agent服务状态
ansible $i -m shell -a "systemctl enable zabbix-agent"
ansible $i -m shell -a "systemctl restart zabbix-agent"
ansible $i -m shell -a "systemctl status zabbix-agent"

done

### 给脚本加执行权限并执行
[root@zabbix-server ~]#  chmod +x zabbix-agent.sh
[root@zabbix-server ~]#  ./zabbix-agent.sh

### 检查[zc7] 和 [zc8] 服务器组的psk文件
[root@zabbix-server ~]#  ansible zc7 -m shell -a "cat /etc/zabbix/zabbix.psk"

### 把zabbix-agent 加入开机启动并启动zabbix-agent

[root@zabbix-server ~]# ansible zc7 -m shell -a "systemctl enable zabbix-agent"
[root@zabbix-server ~]# ansible zc7 -m shell -a "systemctl restart zabbix-agent"
[root@zabbix-server ~]# ansible zc7 -m shell -a "systemctl status zabbix-agent"

8，在zabbix服务器Web中加入[zc7]和[zc8]服务器组的每一台主机进行监控。
参考：安装Zabbix监控服务器及邮件/短信/微信报警

附件：zabbix_agentd.conf模板



# This is a configuration file for Zabbix agent daemon (Unix)
# To get more information about Zabbix, visit http://www.zabbix.com

############ GENERAL PARAMETERS #################

### Option: PidFile
#	Name of PID file.
#
# Mandatory: no
# Default:
# PidFile=/tmp/zabbix_agentd.pid

PidFile=/var/run/zabbix/zabbix_agentd.pid

### Option: LogType
#	Specifies where log messages are written to:
#		system  - syslog
#		file    - file specified with LogFile parameter
#		console - standard output
#
# Mandatory: no
# Default:
# LogType=file

### Option: LogFile
#	Log file name for LogType 'file' parameter.
#
# Mandatory: yes, if LogType is set to file, otherwise no
# Default:
# LogFile=

LogFile=/var/log/zabbix/zabbix_agentd.log

### Option: LogFileSize
#	Maximum size of log file in MB.
#	0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
# LogFileSize=1

LogFileSize=0

### Option: DebugLevel
#	Specifies debug level:
#	0 - basic information about starting and stopping of Zabbix processes
#	1 - critical information
#	2 - error information
#	3 - warnings
#	4 - for debugging (produces lots of information)
#	5 - extended debugging (produces even more information)
#
# Mandatory: no
# Range: 0-5
# Default:
# DebugLevel=3

### Option: SourceIP
#	Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=

### Option: EnableRemoteCommands
#	Whether remote commands from Zabbix server are allowed.
#	0 - not allowed
#	1 - allowed
#
# Mandatory: no
# Default:
# EnableRemoteCommands=0

### Option: LogRemoteCommands
#	Enable logging of executed shell commands as warnings.
#	0 - disabled
#	1 - enabled
#
# Mandatory: no
# Default:
# LogRemoteCommands=0

##### Passive checks related

### Option: Server
#	List of comma delimited IP addresses, optionally in CIDR notation, or DNS names of Zabbix servers and Zabbix proxies.
#	Incoming connections will be accepted only from the hosts listed here.
#	If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally
#	and '::/0' will allow any IPv4 or IPv6 address.
#	'0.0.0.0/0' can be used to allow any IPv4 address.
#	Example: Server=127.0.0.1,192.168.1.0/24,::1,2001:db8::/32,zabbix.example.com
#
# Mandatory: yes, if StartAgents is not explicitly set to 0
# Default:
# Server=

# zabbix server 端IP地址 （改为你自己的IP）
Server=1.1.1.1  

### Option: ListenPort
#	Agent will listen on this port for connections from the server.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# ListenPort=10050

### Option: ListenIP
#	List of comma delimited IP addresses that the agent should listen on.
#	First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0

### Option: StartAgents
#	Number of pre-forked instances of zabbix_agentd that process passive checks.
#	If set to 0, disables passive checks and the agent will not listen on any TCP port.
#
# Mandatory: no
# Range: 0-100
# Default:
# StartAgents=3

##### Active checks related

### Option: ServerActive
#	List of comma delimited IP:port (or DNS name:port) pairs of Zabbix servers and Zabbix proxies for active checks.
#	If port is not specified, default port is used.
#	IPv6 addresses must be enclosed in square brackets if port for that host is specified.
#	If port is not specified, square brackets for IPv6 addresses are optional.
#	If this parameter is not specified, active checks are disabled.
#	Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
#
# Mandatory: no
# Default:
#ServerActive=
# zabbix server 端IP地址 （改为你自己的IP）
ServerActive= 1.1.1.1

### Option: Hostname
#	Unique, case sensitive hostname.
#	Required for active checks and must match hostname as configured on the server.
#	Value is acquired from HostnameItem if undefined.
#
# Mandatory: no
# Default:
# Hostname=
Hostname=milcdn1

### Option: HostnameItem
#	Item used for generating Hostname if it is undefined. Ignored if Hostname is defined.
#	Does not support UserParameters or aliases.
#
# Mandatory: no
# Default:
# HostnameItem=system.hostname

### Option: HostMetadata
#	Optional parameter that defines host metadata.
#	Host metadata is used at host auto-registration process.
#	An agent will issue an error and not start if the value is over limit of 255 characters.
#	If not defined, value will be acquired from HostMetadataItem.
#
# Mandatory: no
# Range: 0-255 characters
# Default:
# HostMetadata=

### Option: HostMetadataItem
#	Optional parameter that defines an item used for getting host metadata.
#	Host metadata is used at host auto-registration process.
#	During an auto-registration request an agent will log a warning message if
#	the value returned by specified item is over limit of 255 characters.
#	This option is only used when HostMetadata is not defined.
#
# Mandatory: no
# Default:
# HostMetadataItem=

### Option: RefreshActiveChecks
#	How often list of active checks is refreshed, in seconds.
#
# Mandatory: no
# Range: 60-3600
# Default:
# RefreshActiveChecks=120

### Option: BufferSend
#	Do not keep data longer than N seconds in buffer.
#
# Mandatory: no
# Range: 1-3600
# Default:
# BufferSend=5

### Option: BufferSize
#	Maximum number of values in a memory buffer. The agent will send
#	all collected data to Zabbix Server or Proxy if the buffer is full.
#
# Mandatory: no
# Range: 2-65535
# Default:
# BufferSize=100

### Option: MaxLinesPerSecond
#	Maximum number of new lines the agent will send per second to Zabbix Server
#	or Proxy processing 'log' and 'logrt' active checks.
#	The provided value will be overridden by the parameter 'maxlines',
#	provided in 'log' or 'logrt' item keys.
#
# Mandatory: no
# Range: 1-1000
# Default:
# MaxLinesPerSecond=20

############ ADVANCED PARAMETERS #################

### Option: Alias
#	Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one.
#	Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed.
#	Different Alias keys may reference the same item key.
#	For example, to retrieve the ID of user 'zabbix':
#	Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
#	Now shorthand key zabbix.userid may be used to retrieve data.
#	Aliases can be used in HostMetadataItem but not in HostnameItem parameters.
#
# Mandatory: no
# Range:
# Default:

### Option: Timeout
#	Spend no more than Timeout seconds on processing
#
# Mandatory: no
# Range: 1-30
# Default:
# Timeout=3

### Option: AllowRoot
#	Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent
#	will try to switch to the user specified by the User configuration option instead.
#	Has no effect if started under a regular user.
#	0 - do not allow
#	1 - allow
#
# Mandatory: no
# Default:
# AllowRoot=0

### Option: User
#	Drop privileges to a specific, existing user on the system.
#	Only has effect if run as 'root' and AllowRoot is disabled.
#
# Mandatory: no
# Default:
# User=zabbix

### Option: Include
#	You may include individual files or all files in a directory in the configuration file.
#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
# Mandatory: no
# Default:
# Include=

Include=/etc/zabbix/zabbix_agentd.d/*.conf

# Include=/usr/local/etc/zabbix_agentd.userparams.conf
# Include=/usr/local/etc/zabbix_agentd.conf.d/
# Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf

####### USER-DEFINED MONITORED PARAMETERS #######

### Option: UnsafeUserParameters
#	Allow all characters to be passed in arguments to user-defined parameters.
#	The following characters are not allowed:
#	\ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @
#	Additionally, newline characters are not allowed.
#	0 - do not allow
#	1 - allow
#
# Mandatory: no
# Range: 0-1
# Default:
# UnsafeUserParameters=0

### Option: UserParameter
#	User-defined parameter to monitor. There can be several user-defined parameters.
#	Format: UserParameter=,
#	See 'zabbix_agentd' directory for examples.
#
# Mandatory: no
# Default:
# UserParameter=

####### LOADABLE MODULES #######

### Option: LoadModulePath
#	Full path to location of agent modules.
#	Default depends on compilation options.
#	To see the default path run command "zabbix_agentd --help".
#
# Mandatory: no
# Default:
# LoadModulePath=${libdir}/modules

### Option: LoadModule
#	Module to load at agent startup. Modules are used to extend functionality of the agent.
#	Formats:
#		LoadModule=
#		LoadModule=
#		LoadModule=
#	Either the module must be located in directory specified by LoadModulePath or the path must precede the module name.
#	If the preceding path is absolute (starts with '/') then LoadModulePath is ignored.
#	It is allowed to include multiple LoadModule parameters.
#
# Mandatory: no
# Default:
# LoadModule=

####### TLS-RELATED PARAMETERS #######

### Option: TLSConnect
#	How the agent should connect to server or proxy. Used for active checks.
#	Only one value can be specified:
#		unencrypted - connect without encryption
#		psk         - connect using TLS and a pre-shared key
#		cert        - connect using TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
TLSConnect=psk

### Option: TLSAccept
#	What incoming connections to accept.
#	Multiple values can be specified, separated by comma:
#		unencrypted - accept connections without encryption
#		psk         - accept connections secured with TLS and a pre-shared key
#		cert        - accept connections secured with TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
TLSAccept=psk

### Option: TLSCAFile
#	Full pathname of a file containing the top-level CA(s) certificates for
#	peer certificate verification.
#
# Mandatory: no
# Default:
# TLSCAFile=

### Option: TLSCRLFile
#	Full pathname of a file containing revoked certificates.
#
# Mandatory: no
# Default:
# TLSCRLFile=

### Option: TLSServerCertIssuer
#      Allowed server certificate issuer.
#
# Mandatory: no
# Default:
# TLSServerCertIssuer=

### Option: TLSServerCertSubject
#      Allowed server certificate subject.
#
# Mandatory: no
# Default:
# TLSServerCertSubject=

### Option: TLSCertFile
#	Full pathname of a file containing the agent certificate or certificate chain.
#
# Mandatory: no
# Default:
# TLSCertFile=

### Option: TLSKeyFile
#	Full pathname of a file containing the agent private key.
#
# Mandatory: no
# Default:
# TLSKeyFile=

### Option: TLSPSKIdentity
#	Unique, case sensitive string used to identify the pre-shared key.
#
# Mandatory: no
# Default:

#  步骤7中脚本 sed操作的PSK文件名称
TLSPSKIdentity=PSK-milcdn1

### Option: TLSPSKFile
#	Full pathname of a file containing the pre-shared key.
#
# Mandatory: no
# Default:

# 步骤7中脚本写入的psk文件
TLSPSKFile=/etc/zabbix/zabbix.psk